Diagnosing and Repairing the Charging System



1.	When using an inductive ammeter:
	A.	The lead should not be clamped over a positive battery cable.
	B.	The lead should not be clamped over a negative battery cable.
	C.	All lights and accessories must be off when measuring current output.
	D.	All lights and accessories must be on when measuring current output.

2.	When conducting the full-field test, system damage may occur if voltage rises above what level?
	A.	11.5.
	B.	13.5.
	C.	14.5.
	D.	16.5.

3.	Before working on generator wiring:
	A.	Disconnect the negative battery cable.
	B.	Disconnect the positive battery cable.
	C.	Disconnect the charging system wiring while the generator is running.
	D.	None of the above.

4.	What kind of lubricant may be required when installing regulators inside or on the back of the generator and the diode bridge?
	A.	Insoluble grease.
	B.	Heat-transfer grease.
	C.	Cold-transfer grease.
	D.	Corrosion-control grease.

5.	When conducting an output terminal test, the output terminal is grounded when:
	A.	Both test lead readings are low.
	B.	Both test lead readings are high.
	C.	Both a and b.
	D.	Neither a nor b.

Log In

The resource you requested requires you to enter a username and password below: