Diagnosing and Repairing Steering Systems



1.	Before removing the steering column, which of the following steps should be completed?
	A.	Check steering responsiveness.
	B.	Tilt wheel toward windshield.
	C.	Disconnect cruise control.
	D.	Establish an initial steering alignment position.

2.	When reinstalling the steering column, you should:
	A.	Tilt wheel toward seat.
	B.	Make sure the steering wheel is straight.
	C.	Make sure the wheels and steering column are in the same position as they were prior to removal.
	D.	Make sure the steering wheel does not lock when the ignition is off.

3.	After service work is completed, what should be done to ball joints and tie-rod ends?
	A.	They should be greased.
	B.	They should be cleaned.
	C.	They should be honed.
	D.	They should be tightened.

4.	What may require disconnection to prevent accidental air bag discharge during service?
	A.	Battery.
	B.	Specific fuse.
	C.	Both a and b.
	D.	Neither a nor b.

5.	If the steering wheel is turned with the steering system disconnected, what part may be damaged?
	A.	Tie rods.
	B.	Clock spring.
	C.	Power steering pressure switch.
	D.	Steering angle sensor.

Log In

The resource you requested requires you to enter a username and password below: